Zook Fishing Co

RAP Systems Pipe

$299.99 USD

Sale Sold out

Model 15 Degree Tall Boy 0 Degree Tall Boy 30 Degree Tall Boy 15 Degree Standard 15 Degree Stubby 30 Degree Standard 0 Degree Standard

Quantity

ABOUT RAP SYSTEMS

RAP Systems pipes are a tackle investment that you can take with you from boat to boat just like your fishing poles. We have found through the last few years that so many of our customers share the same stories of how difficult it is to fight these large fish down on their knees. We created a fulcrum point to help every angler young and old to catch the fish of their lifetime.

We chose 1-1/2 inch T316 marine grade stainless steel tubing for our pipes because of its strength and durability in the marine environment. Each pipe is handmade, not factory-built to ensure that each top is tuned before it is sold. We mandrel bend each pipe to a specific degree and notch the bottoms so they fit into the rod holder and lock into place securely. Our top U-shaped saddle is made from a 1/2 inch solid stainless round bar so it will never bend and is mirror polished to assure your line will not get frayed if it touches it. The tops of our pipes are milled from 1-1/2 inch solid stainless round bar and then center drilled to allow the U saddle to be fitted. The top is then welded to the top of the pipe and the weld is ground smooth.

The pipes are then sent to the polishers where they are polished to a mirror quality. Care for our product is very simple, just rinse with soap and water after use and towel dry. It is recommended that you apply a coat of wax every season to protect the surfaces.

If your gunnels are hitting you from your knees to your thighs, this is the pipe for you. Our 15 degree Tall Boy pipe fits into your 15 degree rod holder and will come straight up 21-22 inches depending on pin depth. Ideal for both conventional and spinning rod outfits. Our ( patent pending ) U shaped saddle allows your rod to rest comfortably into it giving you the advantage of resting your forearms and gaining line.

0 Degree Tall Boy Pipe

It's the perfect tool for low gunnel boats that need that extra height to bring the fulcrum point up to the anglers advantage. If your gunnels hit you from your thighs to your knees, this is the right pipe for your application. Fits perfectly into a zero degree straight rod holder. Measuring in at a total of 31 inches, this pipe will come up out of the rod holder a minimum of 21 inches (based on 10 inch deep rod holder). Ideal for both conventional and spinning rod outfits.

Tall Boy 30 Degree Pipe

Specifically built for low gunnel boats that need that extra height to bring the proper fulcrum point to the angler. If your boats gunnels hit you from your thighs to your knees this is the right pipe for your application. Ideal for both conventional and spinning rods. Coming up 21 inches out of the rod holder (based on a 10 inch deep rod holder) to the U shaped saddle, this pipe is a must have for Contender, Makos, Parkers, SteigerCraft and many other skiffs and center consoles that are too low for our standard series pipes.

15 Degree Standard Pipe

Primarily used in a 15 degree rod holder. This pipe is very popular for the thigh to waist high cap rail center console boats and sportfishers that have 15 degree rod holders. Also used on other center console boats that offer 15 degree rod holders up forward of the console. Ideal for both conventional and spinning rod outfits. The pipe will come straight up from the rod holder approximately 15 inches to the bottom of the (patent pending) U shaped saddle which rotates 360 degrees so the angler has the freedom to follow their fish to the boat. Also, this pipe is a great traveling pipe to go boat to boat. A 15 degree angle works ideal in a 30 degree, 15 degree and zero straight rod holder.

15 Degree Stubby Pipe

Primarily used in a 15 degree rod holder. This pipe is a must have for any high caprail center console that does not have a step in the bow area. Designed to accommodate the Freeman boats, Seavee boats, Contender, Invincible, WorldCat, Everglades, Andros and many more. Ideal for both conventional and spinning rod outfits. The pipe comes up out of the rod holder approximately 11-12 inches to the bottom of the (patent pending) U shaped saddle which rotates 360 degrees so the angler has the freedom to follow their fish to the boat.

30 Degree Standard Pipe

Primarily used in a 30 degree rod holder in taller gunnels. This is the most popular pipe in our lineup. Most all boats have a 30 degree rod holder in the stern area for trolling. Reccomended for boats that have thigh to waist high gunnels such as sportfishers. Ideal for both conventional and spinning rod outfits. The pipe will come straight up out of the rod holder approximately 15 inches from the surface of the rod holder to the bottom of the (patent pending) U shaped saddle which rotates 360 degrees giving the angler the freedom to follow their fish as it comes to the boat.

0 Degree Standard Pipe

Primarily used in a 90 degree straight rod holder. This pipe is specifically made for this rod holder and will stand approximately 15 inches from the surface of the rod holder to the bottom of the (patent pending) U shaped saddle which rotates 360 degrees, giving the angler the freedom to follow their fish as it comes to the boat. Ideal for upper thigh to waist high gunnel boats such as sportfishers that need that extra height for a fulcrum point. This pipe works great on both conventional and spinning rod outfits.

Disclaimer:

RAP Systems LLC would like to emphasize that we are not responsible for any damage to fishing rods, reels, or boats that may occur during the use of our products. While we strive to provide high-quality and durable equipment, the nature of outdoor activities, including fishing, involves inherent risks. Users are advised to exercise caution and follow proper usage guidelines to minimize the potential for damage. RAP Systems LLC shall not be held liable for any broken fishing rods, reels, or boat damage incurred during the course of normal use. Users are encouraged to review and adhere to the product instructions and safety recommendations provided.